PURE BASS
The AD200B MK 3 is quite simply one of the purest bass valve amplifiers ever produced. No bells and whistles, just the shortest signal path from your guitar to your speaker.
Vintage-inspired, but full of modern tones, the AD200B has a creamy, dynamic low-end with a focused mid-range crunch. Simple to use, this amp has only full EQ, master volume, and gain controls. 200 Watts output from (4) 6550 valves means it has enough gain and volume on tap to shake the floor of the largest arenas.
For the purest sounds throughout the bass spectrum, you can’t beat the AD200B.
DEMOS:
1. AD200B through an 0BC115 using an IbanezSR1205 (Pick)
Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.
2. AD200B through an OBC115 using a Fender P-Bass (Slap)
Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.
3. AD200B through an OBC410 using an Ibanez SR1205 (Fingers)
Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.
4. AD200B through OBC410 using a Fender P-Bass (Pick)
Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.
5. AD200B through an OBC810 using an Ibanez SR1205 (Fingers)
Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.
6. AD200B through an OBC810 using a Fender P-Bass (Pick)
Audio clip: Adobe Flash Player (version 9 or above) is required to play this audio clip. Download the latest version here. You also need to have JavaScript enabled in your browser.
FEATURES AND SPECS:
Features | Single channel, all valve, inputs for active or passive basses, slave out | ||
Controls | Master, Treble, Middle, Bass, Gain | ||
Output Power (Heads and Combos) | 200 Watts | ||
Power Handling (Cabinets) | NA | ||
Valves (Heads and Combos) | Power amp: 4 x 6550Preamp: 2 x Ecc83/12ax7 and 1 x Ecc81/12at7 | ||
Speaker Output options (Heads) | 1 x 8 Ohm cabinet connected to the 8 Ohm output1 x 4 Ohm cabinet connected to one of the 4 Ohm outputs2 x 8 Ohm cabinets each connected to one of the 4 Ohm outputs | ||
Speakers (Combos and Cabinets) | NA | ||
Impedance (Cabinets) | NA | ||
Extension Cabinet Options (Combos) | NA | ||
Unboxed Dimensions | H (cm) 27H (in) 10.63 | W (cm) 55W (in) 21.65 | D (cm) 28D (in) 11.02 |
Unboxed Weight | KG 26.25Lb 57.87 | ||
DOWNLOAD:
AD200B Valve positions
REVIEWS AND AWARDS:
“The pairing of Orange’s AD200 and OBC410 results in an extermely muscular stack that moves some serious amounts of air.” | kitarablogi.com
